/* SPDX-License-Identifier: GPL-3.0-or-later * Copyright © 2016-2024 The TokTok team. * Copyright © 2013-2015 Tox project. */ /** @file * @brief Public audio/video API for Tox clients. * * This API can handle multiple calls. Each call has its state, in very rare * occasions the library can change the state of the call without apps * knowledge. * * @section av_events Events and callbacks * * As in the toxcore API, events are handled by callbacks. One callback can be * registered per event. All events have a callback function type named * `toxav_{event}_cb` and a function to register it named * `toxav_callback_{event}`. Passing a NULL callback will result in no callback * being registered for that event. Only one callback per event can be * registered, so if a client needs multiple event listeners, it needs to * implement the dispatch functionality itself. Unlike the toxcore API, lack of * some event handlers will cause the the library to drop calls before they are * started. Hanging up call from a callback causes undefined behaviour. * * @section av_threading Threading implications * * Only toxav_iterate is thread-safe, all other functions must run from the * Tox thread. * * Important exceptions are the `*_iterate` and `*_iterate_interval` * functions. You have to choose either the single thread or the multi thread * functions and read their documentation. * * A common way to run ToxAV (multiple or single instance) is to have a thread, * separate from Tox instance thread, running a simple toxav_iterate loop, * sleeping for `toxav_iteration_interval * milliseconds` on each iteration. * * An important thing to note is that events are triggered from both Tox and * ToxAV thread (see above). Audio and video receive frame events are triggered * from ToxAV thread while all the other events are triggered from Tox thread. * * Tox thread has priority with mutex mechanisms. Any API function can * fail if mutexes are held by Tox thread in which case they will set SYNC * error code. * * @subsection av_multi_threading Separate audio and video threads * * ToxAV supports either a single thread for audio and video or decoding and * encoding them in separate threads. You have to choose one mode and can not * mix function calls to those different modes. * * For best results use the multi-threaded mode and run the audio thread with * higher priority than the video thread. This prioritizes audio over video. */ #ifndef C_TOXCORE_TOXAV_TOXAV_H #define C_TOXCORE_TOXAV_TOXAV_H #include #include #include #ifdef __cplusplus extern "C" { #endif /** * External Tox type. */ #ifndef APIGEN_IGNORE #ifndef TOX_DEFINED #define TOX_DEFINED typedef struct Tox Tox; #endif /* !TOX_DEFINED */ #endif /* !APIGEN_IGNORE */ #ifndef TOXAV_DEFINED #define TOXAV_DEFINED /** * @brief The ToxAV instance type. * * Each ToxAV instance can be bound to only one Tox instance, and Tox instance * can have only one ToxAV instance. One must make sure to close ToxAV instance * prior closing Tox instance otherwise undefined behaviour occurs. Upon closing * of ToxAV instance, all active calls will be forcibly terminated without * notifying peers. */ typedef struct ToxAV ToxAV; #endif /* TOXAV_DEFINED */ /** @{ * @brief Creation and destruction */ typedef enum Toxav_Err_New { /** * The function returned successfully. */ TOXAV_ERR_NEW_OK, /** * One of the arguments to the function was NULL when it was not expected. */ TOXAV_ERR_NEW_NULL, /** * Memory allocation failure while trying to allocate structures required * for the A/V session. */ TOXAV_ERR_NEW_MALLOC, /** * Attempted to create a second session for the same Tox instance. */ TOXAV_ERR_NEW_MULTIPLE, } Toxav_Err_New; /** * Start new A/V session. There can only be only one session per Tox instance. */ ToxAV *toxav_new(Tox *tox, Toxav_Err_New *error); /** * Releases all resources associated with the A/V session. * * If any calls were ongoing, these will be forcibly terminated without * notifying peers. After calling this function, no other functions may be * called and the av pointer becomes invalid. */ void toxav_kill(ToxAV *av); /** * Returns the Tox instance the A/V object was created for. */ Tox *toxav_get_tox(const ToxAV *av); /** @} */ /** @{ * @brief A/V event loop, single thread */ /** * Returns the interval in milliseconds when the next toxav_iterate call should * be. If no call is active at the moment, this function returns 200. * This function MUST be called from the same thread as toxav_iterate. */ uint32_t toxav_iteration_interval(const ToxAV *av); /** * Main loop for the session. This function needs to be called in intervals of * `toxav_iteration_interval()` milliseconds. It is best called in the separate * thread from tox_iterate. */ void toxav_iterate(ToxAV *av); /** @} */ /** @{ * @brief A/V event loop, multiple threads */ /** * Returns the interval in milliseconds when the next toxav_audio_iterate call * should be. If no call is active at the moment, this function returns 200. * This function MUST be called from the same thread as toxav_audio_iterate. */ uint32_t toxav_audio_iteration_interval(const ToxAV *av); /** * Main loop for the session. This function needs to be called in intervals of * `toxav_audio_iteration_interval()` milliseconds. It is best called in a * separate thread from tox_iterate and toxav_video_iterate. The thread calling * this function should have higher priority than the one calling * toxav_video_iterate to prioritize audio over video. */ void toxav_audio_iterate(ToxAV *av); /** * Returns the interval in milliseconds when the next toxav_video_iterate call * should be. If no call is active at the moment, this function returns 200. * This function MUST be called from the same thread as toxav_video_iterate. */ uint32_t toxav_video_iteration_interval(const ToxAV *av); /** * Main loop for the session. This function needs to be called in intervals of * `toxav_video_iteration_interval()` milliseconds. It is best called in a * separate thread from tox_iterate and toxav_audio_iterate. The thread calling * this function should have lower priority than the one calling * toxav_audio_iterate to prioritize audio over video. */ void toxav_video_iterate(ToxAV *av); /** @} */ /** @{ * @brief Call setup */ typedef enum Toxav_Err_Call { /** * The function returned successfully. */ TOXAV_ERR_CALL_OK, /** * A resource allocation error occurred while trying to create the * structures required for the call. */ TOXAV_ERR_CALL_MALLOC, /** * Synchronization error occurred. */ TOXAV_ERR_CALL_SYNC, /** * The friend number did not designate a valid friend. */ TOXAV_ERR_CALL_FRIEND_NOT_FOUND, /** * The friend was valid, but not currently connected. */ TOXAV_ERR_CALL_FRIEND_NOT_CONNECTED, /** * Attempted to call a friend while already in an audio or video call with * them. */ TOXAV_ERR_CALL_FRIEND_ALREADY_IN_CALL, /** * Audio or video bit rate is invalid. */ TOXAV_ERR_CALL_INVALID_BIT_RATE, } Toxav_Err_Call; /** * Call a friend. This will start ringing the friend. * * It is the client's responsibility to stop ringing after a certain timeout, * if such behaviour is desired. If the client does not stop ringing, the * library will not stop until the friend is disconnected. Audio and video * receiving are both enabled by default. * * @param friend_number The friend number of the friend that should be called. * @param audio_bit_rate Audio bit rate in kbit/sec. Set this to 0 to disable * audio sending. * @param video_bit_rate Video bit rate in kbit/sec. Set this to 0 to disable * video sending. */ bool toxav_call(ToxAV *av, uint32_t friend_number, uint32_t audio_bit_rate, uint32_t video_bit_rate, Toxav_Err_Call *error); /** * The function type for the call callback. * * @param friend_number The friend number from which the call is incoming. * @param audio_enabled True if friend is sending audio. * @param video_enabled True if friend is sending video. */ typedef void toxav_call_cb(ToxAV *av, uint32_t friend_number, bool audio_enabled, bool video_enabled, void *user_data); /** * Set the callback for the `call` event. Pass NULL to unset. * */ void toxav_callback_call(ToxAV *av, toxav_call_cb *callback, void *user_data); typedef enum Toxav_Err_Answer { /** * The function returned successfully. */ TOXAV_ERR_ANSWER_OK, /** * Synchronization error occurred. */ TOXAV_ERR_ANSWER_SYNC, /** * Failed to initialize codecs for call session. Note that codec initiation * will fail if there is no receive callback registered for either audio or * video. */ TOXAV_ERR_ANSWER_CODEC_INITIALIZATION, /** * The friend number did not designate a valid friend. */ TOXAV_ERR_ANSWER_FRIEND_NOT_FOUND, /** * The friend was valid, but they are not currently trying to initiate a * call. This is also returned if this client is already in a call with the * friend. */ TOXAV_ERR_ANSWER_FRIEND_NOT_CALLING, /** * Audio or video bit rate is invalid. */ TOXAV_ERR_ANSWER_INVALID_BIT_RATE, } Toxav_Err_Answer; /** * Accept an incoming call. * * If answering fails for any reason, the call will still be pending and it is * possible to try and answer it later. Audio and video receiving are both * enabled by default. * * @param friend_number The friend number of the friend that is calling. * @param audio_bit_rate Audio bit rate in kbit/sec. Set this to 0 to disable * audio sending. * @param video_bit_rate Video bit rate in kbit/sec. Set this to 0 to disable * video sending. */ bool toxav_answer(ToxAV *av, uint32_t friend_number, uint32_t audio_bit_rate, uint32_t video_bit_rate, Toxav_Err_Answer *error); /** @} */ /** @{ * @brief Call state graph */ enum Toxav_Friend_Call_State { /** * The empty bit mask. None of the bits specified below are set. */ TOXAV_FRIEND_CALL_STATE_NONE = 0, /** * Set by the AV core if an error occurred on the remote end or if friend * timed out. This is the final state after which no more state * transitions can occur for the call. This call state will never be * triggered in combination with other call states. */ TOXAV_FRIEND_CALL_STATE_ERROR = 1, /** * The call has finished. This is the final state after which no more state * transitions can occur for the call. This call state will never be * triggered in combination with other call states. */ TOXAV_FRIEND_CALL_STATE_FINISHED = 2, /** * The flag that marks that friend is sending audio. */ TOXAV_FRIEND_CALL_STATE_SENDING_A = 4, /** * The flag that marks that friend is sending video. */ TOXAV_FRIEND_CALL_STATE_SENDING_V = 8, /** * The flag that marks that friend is receiving audio. */ TOXAV_FRIEND_CALL_STATE_ACCEPTING_A = 16, /** * The flag that marks that friend is receiving video. */ TOXAV_FRIEND_CALL_STATE_ACCEPTING_V = 32, }; /** * The function type for the call_state callback. * * @param friend_number The friend number for which the call state changed. * @param state The bitmask of the new call state which is guaranteed to be * different than the previous state. The state is set to 0 when the call is * paused. The bitmask represents all the activities currently performed by * the friend. */ typedef void toxav_call_state_cb(ToxAV *av, uint32_t friend_number, uint32_t state, void *user_data); /** * Set the callback for the `call_state` event. Pass NULL to unset. * */ void toxav_callback_call_state(ToxAV *av, toxav_call_state_cb *callback, void *user_data); /** @} */ /** @{ * @brief Call control */ typedef enum Toxav_Call_Control { /** * Resume a previously paused call. Only valid if the pause was caused by * this client, if not, this control is ignored. Not valid before the call * is accepted. */ TOXAV_CALL_CONTROL_RESUME, /** * Put a call on hold. Not valid before the call is accepted. */ TOXAV_CALL_CONTROL_PAUSE, /** * Reject a call if it was not answered, yet. Cancel a call after it was * answered. */ TOXAV_CALL_CONTROL_CANCEL, /** * Request that the friend stops sending audio. Regardless of the friend's * compliance, this will cause the audio_receive_frame event to stop being * triggered on receiving an audio frame from the friend. */ TOXAV_CALL_CONTROL_MUTE_AUDIO, /** * Calling this control will notify client to start sending audio again. */ TOXAV_CALL_CONTROL_UNMUTE_AUDIO, /** * Request that the friend stops sending video. Regardless of the friend's * compliance, this will cause the video_receive_frame event to stop being * triggered on receiving a video frame from the friend. */ TOXAV_CALL_CONTROL_HIDE_VIDEO, /** * Calling this control will notify client to start sending video again. */ TOXAV_CALL_CONTROL_SHOW_VIDEO, } Toxav_Call_Control; typedef enum Toxav_Err_Call_Control { /** * The function returned successfully. */ TOXAV_ERR_CALL_CONTROL_OK, /** * Synchronization error occurred. */ TOXAV_ERR_CALL_CONTROL_SYNC, /** * The friend_number passed did not designate a valid friend. */ TOXAV_ERR_CALL_CONTROL_FRIEND_NOT_FOUND, /** * This client is currently not in a call with the friend. Before the call * is answered, only CANCEL is a valid control. */ TOXAV_ERR_CALL_CONTROL_FRIEND_NOT_IN_CALL, /** * Happens if user tried to pause an already paused call or if trying to * resume a call that is not paused. */ TOXAV_ERR_CALL_CONTROL_INVALID_TRANSITION, } Toxav_Err_Call_Control; /** * Sends a call control command to a friend. * * @param friend_number The friend number of the friend this client is in a call * with. * @param control The control command to send. * * @return true on success. */ bool toxav_call_control(ToxAV *av, uint32_t friend_number, Toxav_Call_Control control, Toxav_Err_Call_Control *error); /** @} */ /** @{ * @brief Controlling bit rates */ typedef enum Toxav_Err_Bit_Rate_Set { /** * The function returned successfully. */ TOXAV_ERR_BIT_RATE_SET_OK, /** * Synchronization error occurred. */ TOXAV_ERR_BIT_RATE_SET_SYNC, /** * The bit rate passed was not one of the supported values. */ TOXAV_ERR_BIT_RATE_SET_INVALID_BIT_RATE, /** * The friend_number passed did not designate a valid friend. */ TOXAV_ERR_BIT_RATE_SET_FRIEND_NOT_FOUND, /** * This client is currently not in a call with the friend. */ TOXAV_ERR_BIT_RATE_SET_FRIEND_NOT_IN_CALL, } Toxav_Err_Bit_Rate_Set; /** @} */ /** @{ * @brief A/V sending */ typedef enum Toxav_Err_Send_Frame { /** * The function returned successfully. */ TOXAV_ERR_SEND_FRAME_OK, /** * In case of video, one of Y, U, or V was NULL. In case of audio, the * samples data pointer was NULL. */ TOXAV_ERR_SEND_FRAME_NULL, /** * The friend_number passed did not designate a valid friend. */ TOXAV_ERR_SEND_FRAME_FRIEND_NOT_FOUND, /** * This client is currently not in a call with the friend. */ TOXAV_ERR_SEND_FRAME_FRIEND_NOT_IN_CALL, /** * Synchronization error occurred. */ TOXAV_ERR_SEND_FRAME_SYNC, /** * One of the frame parameters was invalid. E.g. the resolution may be too * small or too large, or the audio sampling rate may be unsupported. */ TOXAV_ERR_SEND_FRAME_INVALID, /** * Either friend turned off audio or video receiving or we turned off * sending for the said payload. */ TOXAV_ERR_SEND_FRAME_PAYLOAD_TYPE_DISABLED, /** * Failed to push frame through RTP interface. */ TOXAV_ERR_SEND_FRAME_RTP_FAILED, } Toxav_Err_Send_Frame; /** * Send an audio frame to a friend. * * The expected format of the PCM data is: * `[s1c1][s1c2][...][s2c1][s2c2][...]...` * Meaning: sample 1 for channel 1, sample 1 for channel 2, ... * For mono audio, this has no meaning, every sample is subsequent. For stereo, * this means the expected format is LRLRLR... with samples for left and right * alternating. * * @param friend_number The friend number of the friend to which to send an * audio frame. * @param pcm An array of audio samples. The size of this array must be * `sample_count * channels`. * @param sample_count Number of samples in this frame. Valid numbers here are * `((sample rate) * (audio length) / 1000)`, where audio length can be * 2.5, 5, 10, 20, 40 or 60 milliseconds. * @param channels Number of audio channels. Supported values are 1 and 2. * @param sampling_rate Audio sampling rate used in this frame. Valid sampling * rates are 8000, 12000, 16000, 24000, or 48000. */ bool toxav_audio_send_frame(ToxAV *av, uint32_t friend_number, const int16_t pcm[], size_t sample_count, uint8_t channels, uint32_t sampling_rate, Toxav_Err_Send_Frame *error); /** * Set the bit rate to be used in subsequent audio frames. * * @param friend_number The friend number of the friend for which to set the * bit rate. * @param bit_rate The new audio bit rate in kbit/sec. Set to 0 to disable. * * @return true on success. */ bool toxav_audio_set_bit_rate(ToxAV *av, uint32_t friend_number, uint32_t bit_rate, Toxav_Err_Bit_Rate_Set *error); /** * The function type for the audio_bit_rate callback. The event is triggered * when the network becomes too saturated for current bit rates at which point * ToxAV suggests new bit rates. * * @param friend_number The friend number of the friend for which to set the * bit rate. * @param audio_bit_rate Suggested maximum audio bit rate in kbit/sec. */ typedef void toxav_audio_bit_rate_cb(ToxAV *av, uint32_t friend_number, uint32_t audio_bit_rate, void *user_data); /** * Set the callback for the `audio_bit_rate` event. Pass NULL to unset. * */ void toxav_callback_audio_bit_rate(ToxAV *av, toxav_audio_bit_rate_cb *callback, void *user_data); /** * Send a video frame to a friend. * * The video frame needs to be planar YUV420. * Y - plane should be of size: `width * height` * U - plane should be of size: `(width/2) * (height/2)` * V - plane should be of size: `(width/2) * (height/2)` * * @param friend_number The friend number of the friend to which to send a video * frame. * @param width Width of the frame in pixels. * @param height Height of the frame in pixels. * @param y Y (Luminance) plane data. * @param u U (Chroma) plane data. * @param v V (Chroma) plane data. */ bool toxav_video_send_frame( ToxAV *av, uint32_t friend_number, uint16_t width, uint16_t height, const uint8_t y[/*! width * height */], const uint8_t u[/*! width/2 * height/2 */], const uint8_t v[/*! width/2 * height/2 */], Toxav_Err_Send_Frame *error); /** * Set the bit rate to be used in subsequent video frames. * * @param friend_number The friend number of the friend for which to set the * bit rate. * @param bit_rate The new video bit rate in kbit/sec. Set to 0 to disable. * * @return true on success. */ bool toxav_video_set_bit_rate(ToxAV *av, uint32_t friend_number, uint32_t bit_rate, Toxav_Err_Bit_Rate_Set *error); /** * The function type for the video_bit_rate callback. The event is triggered * when the network becomes too saturated for current bit rates at which point * ToxAV suggests new bit rates. * * @param friend_number The friend number of the friend for which to set the * bit rate. * @param video_bit_rate Suggested maximum video bit rate in kbit/sec. */ typedef void toxav_video_bit_rate_cb(ToxAV *av, uint32_t friend_number, uint32_t video_bit_rate, void *user_data); /** * Set the callback for the `video_bit_rate` event. Pass NULL to unset. * */ void toxav_callback_video_bit_rate(ToxAV *av, toxav_video_bit_rate_cb *callback, void *user_data); /** @} */ /** @{ * @brief A/V receiving */ /** * The function type for the audio_receive_frame callback. The callback can be * called multiple times per single iteration depending on the amount of queued * frames in the buffer. The received format is the same as in send function. * * @param friend_number The friend number of the friend who sent an audio frame. * @param pcm An array of audio samples (`sample_count * channels` elements). * @param sample_count The number of audio samples per channel in the PCM array. * @param channels Number of audio channels. * @param sampling_rate Sampling rate used in this frame. * */ typedef void toxav_audio_receive_frame_cb(ToxAV *av, uint32_t friend_number, const int16_t pcm[], size_t sample_count, uint8_t channels, uint32_t sampling_rate, void *user_data); /** * Set the callback for the `audio_receive_frame` event. Pass NULL to unset. * */ void toxav_callback_audio_receive_frame(ToxAV *av, toxav_audio_receive_frame_cb *callback, void *user_data); /** * The function type for the video_receive_frame callback. * * The size of plane data is derived from width and height as documented * below. * * Strides represent padding for each plane that may or may not be present. * You must handle strides in your image processing code. Strides are * negative if the image is bottom-up hence why you MUST `abs()` it when * calculating plane buffer size. * * @param friend_number The friend number of the friend who sent a video frame. * @param width Width of the frame in pixels. * @param height Height of the frame in pixels. * @param y Luminosity plane. `Size = MAX(width, abs(ystride)) * height`. * @param u U chroma plane. `Size = MAX(width/2, abs(ustride)) * (height/2)`. * @param v V chroma plane. `Size = MAX(width/2, abs(vstride)) * (height/2)`. * @param ystride Luminosity plane stride. * @param ustride U chroma plane stride. * @param vstride V chroma plane stride. */ typedef void toxav_video_receive_frame_cb( ToxAV *av, uint32_t friend_number, uint16_t width, uint16_t height, const uint8_t y[/*! max(width, abs(ystride)) * height */], const uint8_t u[/*! max(width/2, abs(ustride)) * (height/2) */], const uint8_t v[/*! max(width/2, abs(vstride)) * (height/2) */], int32_t ystride, int32_t ustride, int32_t vstride, void *user_data); /** * Set the callback for the `video_receive_frame` event. Pass NULL to unset. * */ void toxav_callback_video_receive_frame(ToxAV *av, toxav_video_receive_frame_cb *callback, void *user_data); #ifndef APIGEN_IGNORE /*** * NOTE Compatibility with old ToxAV group calls. TODO(iphydf): remove * * TODO(iphydf): Use proper new API guidelines for these. E.g. don't use inline * function types, don't have per-callback userdata, especially don't have one * userdata per group. */ // TODO(iphydf): Use this better typed one instead of the void-pointer one // below. typedef void toxav_group_audio_cb(Tox *tox, uint32_t groupnumber, uint32_t peernumber, const int16_t pcm[], uint32_t samples, uint8_t channels, uint32_t sample_rate, void *user_data); typedef void toxav_audio_data_cb(void *tox, uint32_t groupnumber, uint32_t peernumber, const int16_t pcm[], uint32_t samples, uint8_t channels, uint32_t sample_rate, void *userdata); /** @brief Create a new ToxAV group. * * @return group number on success. * @retval -1 on failure. * * Note that total size of pcm in bytes is equal to * `samples * channels * sizeof(int16_t)`. */ int32_t toxav_add_av_groupchat(Tox *tox, toxav_audio_data_cb *audio_callback, void *userdata); /** @brief Join a AV group (you need to have been invited first). * * @return group number on success. * @retval -1 on failure. * * Note that total size of pcm in bytes is equal to * `samples * channels * sizeof(int16_t)`. */ int32_t toxav_join_av_groupchat( Tox *tox, uint32_t friendnumber, const uint8_t data[], uint16_t length, toxav_audio_data_cb *audio_callback, void *userdata); /** @brief Send audio to the group chat. * * @retval 0 on success. * @retval -1 on failure. * * Note that total size of pcm in bytes is equal to * `samples * channels * sizeof(int16_t)`. * * Valid number of samples are `(sample rate) * (audio length) / 1000` * (Valid values for audio length are: 2.5, 5, 10, 20, 40 or 60 ms) * Valid number of channels are 1 or 2. * Valid sample rates are 8000, 12000, 16000, 24000, or 48000. * * Recommended values are: samples = 960, channels = 1, sample_rate = 48000 */ int32_t toxav_group_send_audio( Tox *tox, uint32_t groupnumber, const int16_t pcm[], uint32_t samples, uint8_t channels, uint32_t sample_rate); /** @brief Enable A/V in a groupchat. * * A/V must be enabled on a groupchat for audio to be sent to it and for * received audio to be handled. * * An A/V group created with `toxav_add_av_groupchat` or * `toxav_join_av_groupchat` will start with A/V enabled. * * An A/V group loaded from a savefile will start with A/V disabled. * * @retval 0 on success. * @retval -1 on failure. * * Note that total size of pcm in bytes is equal to * `samples * channels * sizeof(int16_t)`. */ int32_t toxav_groupchat_enable_av( Tox *tox, uint32_t groupnumber, toxav_audio_data_cb *audio_callback, void *userdata); /** @brief Disable A/V in a groupchat. * * @retval 0 on success. * @retval -1 on failure. */ int32_t toxav_groupchat_disable_av(Tox *tox, uint32_t groupnumber); /** @brief Return whether A/V is enabled in the groupchat. */ bool toxav_groupchat_av_enabled(Tox *tox, uint32_t groupnumber); #endif /* !APIGEN_IGNORE */ /** @} */ #ifdef __cplusplus } /* extern "C" */ #endif //!TOKSTYLE- #ifndef DOXYGEN_IGNORE typedef ToxAV Toxav; typedef Toxav_Err_Call TOXAV_ERR_CALL; typedef Toxav_Err_New TOXAV_ERR_NEW; typedef Toxav_Err_Answer TOXAV_ERR_ANSWER; typedef Toxav_Err_Call_Control TOXAV_ERR_CALL_CONTROL; typedef Toxav_Err_Bit_Rate_Set TOXAV_ERR_BIT_RATE_SET; typedef Toxav_Err_Send_Frame TOXAV_ERR_SEND_FRAME; typedef Toxav_Call_Control TOXAV_CALL_CONTROL; typedef enum Toxav_Friend_Call_State TOXAV_FRIEND_CALL_STATE; #endif //!TOKSTYLE+ #endif /* C_TOXCORE_TOXAV_TOXAV_H */