tomato/external/toxcore/c-toxcore/toxav/video.c

448 lines
15 KiB
C

/* SPDX-License-Identifier: GPL-3.0-or-later
* Copyright © 2016-2018 The TokTok team.
* Copyright © 2013-2015 Tox project.
*/
#include "video.h"
#include <assert.h>
#include <stdlib.h>
#include <string.h>
#include "msi.h"
#include "ring_buffer.h"
#include "rtp.h"
#include "../toxcore/ccompat.h"
#include "../toxcore/logger.h"
#include "../toxcore/mono_time.h"
#include "../toxcore/network.h"
/**
* Soft deadline the decoder should attempt to meet, in "us" (microseconds).
* Set to zero for unlimited.
*
* By convention, the value 1 is used to mean "return as fast as possible."
*/
// TODO(zoff99): don't hardcode this, let the application choose it
#define WANTED_MAX_DECODER_FPS 40
/**
* VPX_DL_REALTIME (1)
* deadline parameter analogous to VPx REALTIME mode.
*
* VPX_DL_GOOD_QUALITY (1000000)
* deadline parameter analogous to VPx GOOD QUALITY mode.
*
* VPX_DL_BEST_QUALITY (0)
* deadline parameter analogous to VPx BEST QUALITY mode.
*/
#define MAX_DECODE_TIME_US (1000000 / WANTED_MAX_DECODER_FPS) // to allow x fps
/**
* Codec control function to set encoder internal speed settings. Changes in
* this value influences, among others, the encoder's selection of motion
* estimation methods. Values greater than 0 will increase encoder speed at the
* expense of quality.
*
* Note Valid range for VP8: `-16..16`
*/
#define VP8E_SET_CPUUSED_VALUE 16
/**
* Initialize encoder with this value.
*
* Target bandwidth to use for this stream, in kilobits per second.
*/
#define VIDEO_BITRATE_INITIAL_VALUE 5000
#define VIDEO_DECODE_BUFFER_SIZE 5 // this buffer has normally max. 1 entry
static vpx_codec_iface_t *video_codec_decoder_interface(void)
{
return vpx_codec_vp8_dx();
}
static vpx_codec_iface_t *video_codec_encoder_interface(void)
{
return vpx_codec_vp8_cx();
}
#define VIDEO_CODEC_DECODER_MAX_WIDTH 800 // its a dummy value, because the struct needs a value there
#define VIDEO_CODEC_DECODER_MAX_HEIGHT 600 // its a dummy value, because the struct needs a value there
#define VPX_MAX_DIST_START 40
#define VPX_MAX_ENCODER_THREADS 4
#define VPX_MAX_DECODER_THREADS 4
#define VIDEO_VP8_DECODER_POST_PROCESSING_ENABLED 0
static void vc_init_encoder_cfg(const Logger *log, vpx_codec_enc_cfg_t *cfg, int16_t kf_max_dist)
{
const vpx_codec_err_t rc = vpx_codec_enc_config_default(video_codec_encoder_interface(), cfg, 0);
if (rc != VPX_CODEC_OK) {
LOGGER_ERROR(log, "vc_init_encoder_cfg:Failed to get config: %s", vpx_codec_err_to_string(rc));
}
/* Target bandwidth to use for this stream, in kilobits per second */
cfg->rc_target_bitrate = VIDEO_BITRATE_INITIAL_VALUE;
cfg->g_w = VIDEO_CODEC_DECODER_MAX_WIDTH;
cfg->g_h = VIDEO_CODEC_DECODER_MAX_HEIGHT;
cfg->g_pass = VPX_RC_ONE_PASS;
cfg->g_error_resilient = VPX_ERROR_RESILIENT_DEFAULT | VPX_ERROR_RESILIENT_PARTITIONS;
cfg->g_lag_in_frames = 0;
/* Allow lagged encoding
*
* If set, this value allows the encoder to consume a number of input
* frames before producing output frames. This allows the encoder to
* base decisions for the current frame on future frames. This does
* increase the latency of the encoding pipeline, so it is not appropriate
* in all situations (ex: realtime encoding).
*
* Note that this is a maximum value -- the encoder may produce frames
* sooner than the given limit. Set this value to 0 to disable this
* feature.
*/
cfg->kf_min_dist = 0;
cfg->kf_mode = VPX_KF_AUTO; // Encoder determines optimal placement automatically
cfg->rc_end_usage = VPX_VBR; // what quality mode?
/*
* VPX_VBR Variable Bit Rate (VBR) mode
* VPX_CBR Constant Bit Rate (CBR) mode
* VPX_CQ Constrained Quality (CQ) mode -> give codec a hint that we may be on low bandwidth connection
* VPX_Q Constant Quality (Q) mode
*/
if (kf_max_dist > 1) {
cfg->kf_max_dist = kf_max_dist; // a full frame every x frames minimum (can be more often, codec decides automatically)
LOGGER_DEBUG(log, "kf_max_dist=%d (1)", cfg->kf_max_dist);
} else {
cfg->kf_max_dist = VPX_MAX_DIST_START;
LOGGER_DEBUG(log, "kf_max_dist=%d (2)", cfg->kf_max_dist);
}
cfg->g_threads = VPX_MAX_ENCODER_THREADS; // Maximum number of threads to use
/* TODO: set these to something reasonable */
// cfg->g_timebase.num = 1;
// cfg->g_timebase.den = 60; // 60 fps
cfg->rc_resize_allowed = 1; // allow encoder to resize to smaller resolution
cfg->rc_resize_up_thresh = 40;
cfg->rc_resize_down_thresh = 5;
/* TODO: make quality setting an API call, but start with normal quality */
#if 0
/* Highest-resolution encoder settings */
cfg->rc_dropframe_thresh = 0;
cfg->rc_resize_allowed = 0;
cfg->rc_min_quantizer = 2;
cfg->rc_max_quantizer = 56;
cfg->rc_undershoot_pct = 100;
cfg->rc_overshoot_pct = 15;
cfg->rc_buf_initial_sz = 500;
cfg->rc_buf_optimal_sz = 600;
cfg->rc_buf_sz = 1000;
#endif
}
VCSession *vc_new(Mono_Time *mono_time, const Logger *log, ToxAV *av, uint32_t friend_number,
toxav_video_receive_frame_cb *cb, void *cb_data)
{
VCSession *vc = (VCSession *)calloc(1, sizeof(VCSession));
vpx_codec_err_t rc;
if (vc == nullptr) {
LOGGER_WARNING(log, "Allocation failed! Application might misbehave!");
return nullptr;
}
if (create_recursive_mutex(vc->queue_mutex) != 0) {
LOGGER_WARNING(log, "Failed to create recursive mutex!");
free(vc);
return nullptr;
}
const int cpu_used_value = VP8E_SET_CPUUSED_VALUE;
vc->vbuf_raw = rb_new(VIDEO_DECODE_BUFFER_SIZE);
if (vc->vbuf_raw == nullptr) {
goto BASE_CLEANUP;
}
/*
* VPX_CODEC_USE_FRAME_THREADING
* Enable frame-based multi-threading
*
* VPX_CODEC_USE_ERROR_CONCEALMENT
* Conceal errors in decoded frames
*/
vpx_codec_dec_cfg_t dec_cfg;
dec_cfg.threads = VPX_MAX_DECODER_THREADS; // Maximum number of threads to use
dec_cfg.w = VIDEO_CODEC_DECODER_MAX_WIDTH;
dec_cfg.h = VIDEO_CODEC_DECODER_MAX_HEIGHT;
LOGGER_DEBUG(log, "Using VP8 codec for decoder (0)");
rc = vpx_codec_dec_init(vc->decoder, video_codec_decoder_interface(), &dec_cfg,
VPX_CODEC_USE_FRAME_THREADING | VPX_CODEC_USE_POSTPROC);
if (rc == VPX_CODEC_INCAPABLE) {
LOGGER_WARNING(log, "Postproc not supported by this decoder (0)");
rc = vpx_codec_dec_init(vc->decoder, video_codec_decoder_interface(), &dec_cfg, VPX_CODEC_USE_FRAME_THREADING);
}
if (rc != VPX_CODEC_OK) {
LOGGER_ERROR(log, "Init video_decoder failed: %s", vpx_codec_err_to_string(rc));
goto BASE_CLEANUP;
}
if (VIDEO_VP8_DECODER_POST_PROCESSING_ENABLED == 1) {
vp8_postproc_cfg_t pp = {VP8_DEBLOCK, 1, 0};
const vpx_codec_err_t cc_res = vpx_codec_control(vc->decoder, VP8_SET_POSTPROC, &pp);
if (cc_res != VPX_CODEC_OK) {
LOGGER_WARNING(log, "Failed to turn on postproc");
} else {
LOGGER_DEBUG(log, "turn on postproc: OK");
}
} else {
vp8_postproc_cfg_t pp = {0, 0, 0};
vpx_codec_err_t cc_res = vpx_codec_control(vc->decoder, VP8_SET_POSTPROC, &pp);
if (cc_res != VPX_CODEC_OK) {
LOGGER_WARNING(log, "Failed to turn OFF postproc");
} else {
LOGGER_DEBUG(log, "Disable postproc: OK");
}
}
/* Set encoder to some initial values
*/
vpx_codec_enc_cfg_t cfg;
vc_init_encoder_cfg(log, &cfg, 1);
LOGGER_DEBUG(log, "Using VP8 codec for encoder (0.1)");
rc = vpx_codec_enc_init(vc->encoder, video_codec_encoder_interface(), &cfg, VPX_CODEC_USE_FRAME_THREADING);
if (rc != VPX_CODEC_OK) {
LOGGER_ERROR(log, "Failed to initialize encoder: %s", vpx_codec_err_to_string(rc));
goto BASE_CLEANUP_1;
}
rc = vpx_codec_control(vc->encoder, VP8E_SET_CPUUSED, cpu_used_value);
if (rc != VPX_CODEC_OK) {
LOGGER_ERROR(log, "Failed to set encoder control setting: %s", vpx_codec_err_to_string(rc));
vpx_codec_destroy(vc->encoder);
goto BASE_CLEANUP_1;
}
/*
* VPX_CTRL_USE_TYPE(VP8E_SET_NOISE_SENSITIVITY, unsigned int)
* control function to set noise sensitivity
* 0: off, 1: OnYOnly, 2: OnYUV, 3: OnYUVAggressive, 4: Adaptive
*/
#if 0
rc = vpx_codec_control(vc->encoder, VP8E_SET_NOISE_SENSITIVITY, 2);
if (rc != VPX_CODEC_OK) {
LOGGER_ERROR(log, "Failed to set encoder control setting: %s", vpx_codec_err_to_string(rc));
vpx_codec_destroy(vc->encoder);
goto BASE_CLEANUP_1;
}
#endif
vc->linfts = current_time_monotonic(mono_time);
vc->lcfd = 60;
vc->vcb = cb;
vc->vcb_user_data = cb_data;
vc->friend_number = friend_number;
vc->av = av;
vc->log = log;
return vc;
BASE_CLEANUP_1:
vpx_codec_destroy(vc->decoder);
BASE_CLEANUP:
pthread_mutex_destroy(vc->queue_mutex);
rb_kill(vc->vbuf_raw);
free(vc);
return nullptr;
}
void vc_kill(VCSession *vc)
{
if (vc == nullptr) {
return;
}
vpx_codec_destroy(vc->encoder);
vpx_codec_destroy(vc->decoder);
void *p;
while (rb_read(vc->vbuf_raw, &p)) {
free(p);
}
rb_kill(vc->vbuf_raw);
pthread_mutex_destroy(vc->queue_mutex);
LOGGER_DEBUG(vc->log, "Terminated video handler: %p", (void *)vc);
free(vc);
}
void vc_iterate(VCSession *vc)
{
if (vc == nullptr) {
return;
}
pthread_mutex_lock(vc->queue_mutex);
struct RTPMessage *p;
if (!rb_read(vc->vbuf_raw, (void **)&p)) {
LOGGER_TRACE(vc->log, "no Video frame data available");
pthread_mutex_unlock(vc->queue_mutex);
return;
}
const uint16_t log_rb_size = rb_size(vc->vbuf_raw);
pthread_mutex_unlock(vc->queue_mutex);
const struct RTPHeader *const header = &p->header;
uint32_t full_data_len;
if ((header->flags & RTP_LARGE_FRAME) != 0) {
full_data_len = header->data_length_full;
LOGGER_DEBUG(vc->log, "vc_iterate:001:full_data_len=%d", (int)full_data_len);
} else {
full_data_len = p->len;
LOGGER_DEBUG(vc->log, "vc_iterate:002");
}
LOGGER_DEBUG(vc->log, "vc_iterate: rb_read p->len=%d p->header.xe=%d", (int)full_data_len, p->header.xe);
LOGGER_DEBUG(vc->log, "vc_iterate: rb_read rb size=%d", (int)log_rb_size);
const vpx_codec_err_t rc = vpx_codec_decode(vc->decoder, p->data, full_data_len, nullptr, MAX_DECODE_TIME_US);
free(p);
if (rc != VPX_CODEC_OK) {
LOGGER_ERROR(vc->log, "Error decoding video: %d %s", (int)rc, vpx_codec_err_to_string(rc));
return;
}
/* Play decoded images */
vpx_codec_iter_t iter = nullptr;
for (vpx_image_t *dest = vpx_codec_get_frame(vc->decoder, &iter);
dest != nullptr;
dest = vpx_codec_get_frame(vc->decoder, &iter)) {
if (vc->vcb != nullptr) {
vc->vcb(vc->av, vc->friend_number, dest->d_w, dest->d_h,
dest->planes[0], dest->planes[1], dest->planes[2],
dest->stride[0], dest->stride[1], dest->stride[2], vc->vcb_user_data);
}
vpx_img_free(dest); // is this needed? none of the VPx examples show that
}
}
int vc_queue_message(Mono_Time *mono_time, void *vcp, struct RTPMessage *msg)
{
VCSession *vc = (VCSession *)vcp;
/* This function is called with complete messages
* they have already been assembled.
* this function gets called from handle_rtp_packet() and handle_rtp_packet_v3()
*/
if (vc == nullptr || msg == nullptr) {
free(msg);
return -1;
}
const struct RTPHeader *const header = &msg->header;
if (msg->header.pt == (RTP_TYPE_VIDEO + 2) % 128) {
LOGGER_WARNING(vc->log, "Got dummy!");
free(msg);
return 0;
}
if (msg->header.pt != RTP_TYPE_VIDEO % 128) {
LOGGER_WARNING(vc->log, "Invalid payload type! pt=%d", (int)msg->header.pt);
free(msg);
return -1;
}
pthread_mutex_lock(vc->queue_mutex);
if ((header->flags & RTP_LARGE_FRAME) != 0 && header->pt == RTP_TYPE_VIDEO % 128) {
LOGGER_DEBUG(vc->log, "rb_write msg->len=%d b0=%d b1=%d", (int)msg->len, (int)msg->data[0], (int)msg->data[1]);
}
free(rb_write(vc->vbuf_raw, msg));
/* Calculate time it took for peer to send us this frame */
const uint32_t t_lcfd = current_time_monotonic(mono_time) - vc->linfts;
vc->lcfd = t_lcfd > 100 ? vc->lcfd : t_lcfd;
vc->linfts = current_time_monotonic(mono_time);
pthread_mutex_unlock(vc->queue_mutex);
return 0;
}
int vc_reconfigure_encoder(VCSession *vc, uint32_t bit_rate, uint16_t width, uint16_t height, int16_t kf_max_dist)
{
if (vc == nullptr) {
return -1;
}
vpx_codec_enc_cfg_t cfg2 = *vc->encoder->config.enc;
if (cfg2.rc_target_bitrate == bit_rate && cfg2.g_w == width && cfg2.g_h == height && kf_max_dist == -1) {
return 0; /* Nothing changed */
}
if (cfg2.g_w == width && cfg2.g_h == height && kf_max_dist == -1) {
/* Only bit rate changed */
LOGGER_INFO(vc->log, "bitrate change from: %u to: %u", (uint32_t)cfg2.rc_target_bitrate, (uint32_t)bit_rate);
cfg2.rc_target_bitrate = bit_rate;
const vpx_codec_err_t rc = vpx_codec_enc_config_set(vc->encoder, &cfg2);
if (rc != VPX_CODEC_OK) {
LOGGER_ERROR(vc->log, "Failed to set encoder control setting: %s", vpx_codec_err_to_string(rc));
return -1;
}
} else {
/* Resolution is changed, must reinitialize encoder since libvpx v1.4 doesn't support
* reconfiguring encoder to use resolutions greater than initially set.
*/
LOGGER_DEBUG(vc->log, "Have to reinitialize vpx encoder on session %p", (void *)vc);
vpx_codec_ctx_t new_c;
vpx_codec_enc_cfg_t cfg;
vc_init_encoder_cfg(vc->log, &cfg, kf_max_dist);
cfg.rc_target_bitrate = bit_rate;
cfg.g_w = width;
cfg.g_h = height;
LOGGER_DEBUG(vc->log, "Using VP8 codec for encoder");
vpx_codec_err_t rc = vpx_codec_enc_init(&new_c, video_codec_encoder_interface(), &cfg, VPX_CODEC_USE_FRAME_THREADING);
if (rc != VPX_CODEC_OK) {
LOGGER_ERROR(vc->log, "Failed to initialize encoder: %s", vpx_codec_err_to_string(rc));
return -1;
}
const int cpu_used_value = VP8E_SET_CPUUSED_VALUE;
rc = vpx_codec_control(&new_c, VP8E_SET_CPUUSED, cpu_used_value);
if (rc != VPX_CODEC_OK) {
LOGGER_ERROR(vc->log, "Failed to set encoder control setting: %s", vpx_codec_err_to_string(rc));
vpx_codec_destroy(&new_c);
return -1;
}
vpx_codec_destroy(vc->encoder);
memcpy(vc->encoder, &new_c, sizeof(new_c));
}
return 0;
}